Table of Contents
Advertisement
7.5 Prior to assembly
▶
Before assembly of the valve, check compliance of the type designation on the
name plate with your order or order number.
▶
Observe the information on the maximum operating pressure on the name plate.
7.6 Place of installation
The valve should not be installed next to power electronics (e.g. frequency
converters, etc.)
7.7 Assembling the valve with IO-Link interface
7.7.1 Mechanical assembly of the valve
Faulty installation of plug screws and lines!
Improperly fastened plug screws and lines may become loose during subsequent
operation and fly around due to the pressure. This may cause serious injuries.
▶
Only pressurize your system after all plug screws and lines have been completely
and properly mounted according to the specifications.
Insufficient installation space!
Insufficient installation space may lead to jamming or abrasions in case of actuation
and adjustment work at the valve.
▶
Provide for sufficient installation space.
▶
Ensure that actuation, adjustment elements and plug-in connectors are easily
accessible.
Leaking hydraulic fluid!
Hydraulic fluid may leak during assembly and disassembly of the valve. This might
cause persons to slip or fall.
▶
Do not remove the protective caps of the valve until assembly.
▶
After disassembly, seal the hydraulic fluid bores with suitable cap elements.
▶
Immediately remove hydraulic fluid that has leaked out.
Sharp edges!
Valves may have sharp edges at the valve openings. During transport or
assembly/disassembly, cutting or abrasive injuries may result.
▶
Wear corresponding protective clothing during transport.
▶
Do not reach into valve openings!
Have sufficiently dimensioned collecting containers, non-linting cloth and
medium-binding materials ready in order to collect or bind leaking medium.
RE 29118-B/09.2021; 4WRPEH6_3X, 4WRPEH10_3X, 4WRPE6_3X, 4WRPE10_3X, 4WRLE_4X; Bosch Rexroth AG
WARNING
CAUTION
Assembly
27/44
- Quick Links:
- Product Description
Hide quick links:
Advertisement
Table of Contents
