PANEL CONTROLS AND FEATURES A. POWER STATUS LED F. INPUT GAIN CONTROL This bi-color LED glows green when power is After you have installed your system, turn this on and no problems are present. If one of the control to minimum. protection circuits comes on, it will change to Turn the head unit on (and the subwoofer will red.
WIRING LOW LEVEL INPUT WIRING Low-level (RCA) input wiring is preferred for best audio performance. Most trunk and under-seat installations will require a 6-12 feet RCA cable. Always use a high quality cable. NOTE: Do not connect BOTH the high level and low level inputs from your receiver to your amplifier at the same time! Fig.1 HIGH LEVEL INPUT WIRING...
ACCESSORY LIST 1. User Manual 2. Mounting Screw Bag (Ø4x25mm x 4pcs, Ø3x14mm x 2pcs, Ø4x6mm x 8pcs) 3. Input Cable 4. Remote Control 5. Remote Cable 4pcs 6. Mounting Bracket SPECIFICATIONS N-power 100W Low pass filter 50Hz - 180Hz Max power 650W Bass Boost...
TROUBLESHOOTING If you experience operation or performance problems with this product, compare your installation with the electrical wiring diagram on the previous pages. If problems persist,read the following troubleshooting tips which may help eliminate the problems. SYMPTOM POSSIBLE REMEDY Check to make sure you have a good ground connection. Check that the Remote Input (Turn-on) has at least 5V DC.