LG WT19WS6 Owner's Manual page 17

Close the lid
4
• Tub will rotate more than
• Water will be
once without water (While
supplied. After sup-
Water Level LED blinking)
plying,
to recognize Water Level.
laundering will
• Then the Water Level and
be started.
the amount of Detergent to
be used will be shown and
water will be supplied.
5
3
5
Finish
5
6
• When the wash pro-
gram ends, the buzzer
will ring for
10 seconds before
the Power goes off
automatically.
7
6
4
5
6
7
Caution & Note
• If water is already in the tub, or putting wet laundry
into the tub before starting will increase the Water
Level.
• With lightweight bulky loads, Water Level can be set
low.
• Changes to Water Temperature (Hot Wash/Cold
(refer to page 10)
Wash) and wash level are possible during operation.
• Water supply and drain is executed during rinse and this
is a part of normal operation.
• It will cold water and hot water will be supplied ade-
quately to adjust water temperature automati cally.If Cold
Wash is only selected it will laundry only with cold
water.
Do not put laundry.
Maximum Load
Model
WT19WS6 WT17SS6
Less Less
than than
17.0 kg
19.0 kg
Less than
7.0 kg
Less than
3.0 kg