Throttle Trigger And Throttle Trigger Lockout - Husqvarna K970 SmartGuard Workshop Manual

6.16 Throttle trigger and throttle trigger lockout

6.16.1 To remove the throttle trigger and throttle
trigger lockout
When you remove the throttle trigger lockout, use a V-
jaw adjustable pliers. Make sure that you hold the V-jaw
of the pliers adjacent to the handle. Put a cloth on the
throttle trigger lockout before you apply the pliers to
prevent damage to the surface.
1451 - 001 - 02.04.2020
1. Remove the carburetor. Refer to
carburetor on page 17 .
2. Push in the lower part of the throttle trigger lockout
with a V-jaw adjustable pliers.
3. Lift the lower part of the throttle trigger lockout and
pull it out from the pin.
4. Remove the screw and the right handle side.
To remove the
Repair and servicing - 67