Controlling Your Tv With The Supplied Remote - Sony DVP-NS300 Operating Instructions (CD/DVD Component) Operating Instructions Manual

Controlling Your TV with
the Supplied Remote
By adjusting the remote signal, you can
control your TV with the supplied remote.
Controlling TVs with the remote
TV [/1
1
Hold down TV [/1, and enter your TV's
manufacturer's code (see the table
below) using C/X/x/c.
2
Release TV [/1.
Manufacturer's codes of controllable
TVs.
Manufacture Press C/X/x/c to input code
Sony (default) X X
X C
General Electric
JVC x X
c c
Panasonic
X c
Philips
c x
Quasar
X C
RCA
x c
Samsung
Sanyo X x
c C or X C
Sears
c x
Sharp
c C
Toshiba
c X
Zenith
Notes
If you enter a new manufacturer's code, the code
previously entered will be erased.
When you replace the batteries of the remote, the
code you have set may be reset to the default setting.
Set the appropriate code again.
Controlling the TV
By adjusting remote signal, you can control
the sound level, input source, and power
switch of your TV with the supplied remote.
You can control your TV using the buttons
C/X/x/c
below.
By pressing
TV [/1
VOL (volume)
+/–
TV/VIDEO
Note
Depending on the units being connected, you may not
be able to control your TV or to use some of the
buttons.
TV [/1
You can
Turn the TV on or off
Adjust the volume of the TV
Switch the TV's input source
between the TV and other input
sources
TV/VIDEO
VOL +/–
53