Leveling And Door Alignment; Turning On The Power - LG LRKNS1205V Owner's Manual

16 INSTALLATION
CustomChill Drawer Disassembly
1
Open the drawer completely.
2
Lift up the drawer and basket assembly slightly
until it clears the rail safety stops and pull it
forward until it stops.
3
Lift the basket and drawer assembly to remove it.
To reassemble the drawer, align it with the rails and
insert it until it stops, lift it to clear the safety rail stops
and push it in completely.
• The baskets cannot be removed separately from
the lower or middle drawer. The entire basket and
drawer assembly must be removed together.
CAUTION
• Take care when removing the lower drawer to
avoid injuring your feet.
• The basket and drawer assemblies are heavy.
Empty contents before removing or assembling
drawers and use proper lifting techniques to
avoid injury.

Leveling and Door Alignment

Aligning the doors may not be possible if the floor is
not level, or is of weak or poor construction. The
refrigerator is heavy and should be installed on a rigid
and solid surface.
Wood flooring may cause leveling difficulties if it
flexes excessively.
Leveling
• If the floor is uneven, level the refrigerator to avoid
noise and vibration.
CAUTION
• Adjust the front leveling feet so they are lower
than the wheels. The weight of the refrigerator
must rest on the feet, not the wheels, to avoid
risk of movement or tipover.
Using
Screwdriver
To level the refrigerator, use a screwdriver to turn the
leveling feet until they are in firm contact with the floor.
The front of the refrigerator can be slightly higher than
the rear to make shutting the doors easier.

Turning on the Power

• After installing, plug the refrigerator's power cord
into a 3-prong grounded outlet and push the
refrigerator into the final position.
CAUTION
• Connect to a rated power outlet.
• Have a certified electrician check the wall outlet
and wiring for proper grounding.
• Do not damage or cut off the ground terminal of
the power plug.