Ports; Connecting The Dlan Wireless Extender - Devolo Wireless Extender User Manual

Initial use
13
G
G
G
G
2.1.2

Ports

The dLAN
G
G
G
2.2 Connecting the dLAN
To connect the dLAN
outlet at the desired installation location. Ensure that the adapter is fully
inserted in the outlet.
If possible, do not plug the adapter into a power strip. This may impair the
transmission of the dLAN
monitor the speed of the dLAN
only low (i.e. single-digit) speeds are reached, then the connection to the
power grid is possibly not optimal.
You may then also connect a single computer or other network device with
an Ethernet LAN port directly to the dLAN
®
devolo dLAN
Operation: lit continuously when the adapter is connected to the power
grid.
®
dLAN : lit continuously when a connection exists to other HomePlug
adapters; flashes when data is being sent or received via dLAN
WLAN: lit continuously when a WLAN exists; flashes when data is being
sent or received.
LAN connection: lit continuously when a connection with the Ethernet
exists; flashes when data is being sent or received in the LAN.
®
Wireless extender is easy to use. The device has very few ports:
The AC plug connects the adapter to your power outlet.
The WLAN antenna provides the connection to other wireless network
devices. It can be set at an angle of up to 90° in order to optimize
wireless communications to the adapter's location.
The Ethernet LAN port can be used to connect a single PC or other
network device using a standard RJ45 patch cable.
®
Wireless extender, simply plug it into a free power
®
Wireless extender
®
Wireless extender
®
signals. A free wall outlet is preferable. To
®
, use the devolo Informer (see section 3.1). If
®
®
Wireless extender with a
.