Step 3: Add Dlan Adapters - Devolo Wireless Extender User Manual

Devolo dlan wireless extender extenders: user guide
Hide thumbs Also See for Wireless Extender:
Table of Contents

Advertisement

®
Establishing a connection to the dLAN
network
34
Assigning a specific password to a single adapter will exclude it from the
®
remaining dLAN
network. If possible, use the dLAN Configuration Wizard to
®
ensure that a single password is used throughout your entire dLAN
home
network.
4.2.3

Step 3: Add dLAN adapters

®
At this point, add further dLAN
adapters to your home network. You will
need the 16-character security codes from the labels on the bottom of the
adapter housings. Enter the code without hyphens in the Security ID field
and click Add. If the code is correct, a small icon and the network ID of the
found adapter will appear in the list.
®
When launching the dLAN
Configuration Wizard again after a successful
initial installation – when integrating a new adapter into the network, for
example – the application will remember devices and security codes entered
in previous sessions. It will therefore not be necessary to enter them again.
The Configuration Wizard will display an error message if an adapter entered
previously is not found. In that case, check whether the HomePlug device is
connected to the power grid and is available.
®
Once you have entered the security IDs of your dLAN
adapters, your
HomePlug network is complete. All computers and other network devices
connected to the adapters by cable should now be able to communicate with
®
®
devolo
dLAN
Wireless extender

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents