Windows Vista; Customizing The Audio Output - Devolo Audio Extender User Manual

Under Volume
to ensure an optimal sound quality. Afterwards, always adjust the volume of the
audio output using the controls of your stereo system or the active loudspeakers.
You can call up the devolo Informer via the Status menu entry of the dLAN
Audio extender Control.
If the sound output should not work under Windows XP, you can use the com-
mand Restart dLAN Audio extender service to reset the service for the adapter
that is running in the background.
3.4.2

Windows Vista

Under Windows Vista right-click on the icon of the dLAN Audio extender Control
application in the system tray. By selecting the Select default sound card com-
mand, the corresponding Manage Audio Devices control field of the Vista Con-
trol Panel where you can perform the desired setting.
As an alternative, you can also call up the corresponding control field directly via
start
devices. Under Playback, select the desired sound card for audio playback. The
active selection is indicated by a green check mark.
You can call up the devolo Informer via the Status menu entry of the dLAN
Audio extender Control. The command Restart dLAN Audio extender ser-
vice can be used to reset the Windows service for the adapter that is running in
the background.
3.4.3

Customizing the audio output

Deviating from the current selection of the sound output via dLAN Audio
extender Control, you can also separately set a specific sound driver for play-
back in the different applications. This allows you to configure a specific pro-
gram in such a way that the sound output is carried out only on the dLAN Audio
!
Advanced... you should move the volume slider to the top
! !
Control Panel Hardware and Sound
|
Configuration
! !
Sound Manage audio
|
devolo dLAN Audio extender
23
|