Buffalo AirStation WZR-RS-G54 User Manual page 87

Table B.1.1 DIAG LED Activity Table
DIAG LED Display
Continuous Red
Red fl ash, 3 times
Red fl ash, 4 times
B. 1.2 LEDs Work But Client PC Cannot Connect to Network
If the LEDs indicate that the network is working properly (Power LED is on, Transmit/Receive LED
blinks), check the TCP/IP settings of the network.
Changing Client TCP/IP Settings in Windows
Consult the LAN Administrator for TCP/IP settings.
To add or change the TCP/IP Settings:
1. On the Windows task bar click Start.
2. Select Settings, then Control Panel.
3. Double-click on the Network icon to view the Network Properties.
4. From the list of installed components, verify the TCP/IP => wireless LAN adapter protocol is
installed.
Time Description/Action
Starting RAM Error Red fl ash, 2 times Starting Flash ROM
Error
Starting A problem on the wired LAN side
Starting A problem on the wireless LAN side
87
Troubleshooting