Cross Fade Disc Reserve - Denon DCM-5000 Specification

Specification for serial interface
Hide thumbs Also See for DCM-5000:
Table of Contents

Advertisement

.15

Cross Fade Disc Reserve

This command reserves the next tune when the Cross Fade mode starts.
This command is available only when the Cross Fade mode is set and reproduction starts by
the Cross Fade Play command. In this case, Cross Fade reproduction can be started only by
submitting this command.
bytebit
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
(1)
Answers returned
bytebit
0
1
2
3
4
5
(1)
Special condition
The disc number (byte 2 to byte 4) must not be equal to the next disc number (byte 7 to byte 9).
Fade reproduction)
The zone status of Zone 1 should be "Play (F)."
The remaining play time of Zone 1 should be 25 seconds or more.
The next disc number and the track number (byte 7 to byte 11) of the Cross Fade
command
The play time of Zone 1 should be 1 second or more.
The remaining play time of Zone 1 should be 25 seconds or more.
The next disc number and the track number (byte 7 to byte 11) of the Cross Fade
(3) Other
7
6
7
6
Specify a disk number and a track number that are present and available as the parameters.
Conditions of submitting this command
In case the Cross Fade Play command is submitted before this command (Starting the Cross
Play command should be equal to the disc number and the track number (byte 2 to
byte 6) of this command.
In case the Cross Fade Disc Reserve command is submitted before this
Play command should be equal to the disc number and the track number (byte 2 to
byte 6) of this command.
Ÿ
After this command was issued, if it takes a time to read the TOC and others, there
is a case that the player enters the auto-pause mode without performing the cross-
fade function. In this case, the playback starts when the Cross-fade Play Command
was issued from the PC.
5
4
3
STX02h
Command code (
Y
'
'
Disc number (100 digits)
Disc number (10 digits)
Disc number (1 digits)
Track number (10 digits)
Track number (10digits)
Next disc number (100 digits)
Next disc number (10 digits)
Next disc number (1 digits)
Next track number (10 digits)
Next track number (1 digits)
ETX03h
BCCH (high-level)
BCCL (low-level)
5
4
3
STX02h
Reply code (
Y
)
'
'
Answer code
ETX03h
BCCH (high-level)
BCCL (low-level)
2
1
)
2
1
0
0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcm-5001

Table of Contents