Rear Components - HP 24fh Maintenance And Service Manual

4
Viewing Modes
Function button 1—assignable
Power
5
NOTE:
You can reconfigure the Function buttons in the OSD menu to quickly select the most commonly used operations.
Press the Menu button to open the OSD, and then select Menu Control. Select Assign buttons, and then select
one of the available options for the button you want to assign.

Rear components

To identify the components on the rear of the monitor, use this illustration and table.
Table 2-3: Rear components and their descriptions
Component
1 HDMI connector
2 VGA connector
3 Power connector
4 Security cable slot
/
Exit
<
Table 2-2>
increases adjustment levels.
: If the OSD menu is closed, opens the
Viewing Modes
Viewing Modes menu to
choose different screen viewing settings.
: If the OSD menu is open, saves changes and
Exit
exits the OSD menu.
Turns the monitor on or off.
Function
Connects an HDMI cable to the source device.
Connects a VGA cable to the source device.
Connects a power cord.
Connects a security cable to the monitor.
5