Rear Components - HP Pro 7 Series Maintenance And Service Manual

Rear components

To identify the components on the rear of the monitor, use this illustration and table.
Table 2-2 Rear and side components and their descriptions
Component
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
6
Joypad
Security cable slot
Power connector
USB Type-A ports (2)
RJ-45 (network) jack
HDMI port
DisplayPort
DisplayPort OUT
connector
USB Type-A port
USB Type-A port (includes
KVM connection)
Description
Press to open the OSD settings.
Connects an optional security cable.
Connects a power cord.
Connect a USB cable to a peripheral device, such as a keyboard, mouse, or USB
hard drive.
Network (RJ-45) data rate via USB Type-C max speed is 1000 Mbps
Green (left): The network is connected
●
Amber (right): Activity is occurring on the network.
●
NOTE: Supports Wake on Lan (WOL) Out-of-band, Mac Address Passthrough
(MAPT) Out-of-band (HP models only), and PXE boot. The functionality may vary
with PC settings.
NOTE: This network port is fully energy efficient according to IEEE standards
(IEEE 802.3az-2010), as long as all connected devices support this feature.
Connects the HDMI cable to a source device such as a computer.
Connects a DisplayPort cable to a source device such as a computer.
Connects the monitor to a secondary monitor for multi streaming.
NOTE: If you need to remove the DisplayPort cable the from DisplayPort
OUT connector, you should remove the cables in the following order:
1. HDMI cable (if connected)
2. DisplayPort cable from the DisplayPort OUT port
3. DisplayPort cable from the DisplayPort IN port (if connected
Connects a USB cable to a peripheral device, such as a keyboard, mouse, or
USB hard drive.
Connects a USB cable to a peripheral device, such as a keyboard, mouse, or
USB hard drive, and charges peripheral devices. This is the dedicated USB