Emptying Liquid Waste From The Tank; Register Online - Craftsman CMXEVCVVJC809 Instruction Manual

Fig. 15
25. To remove the foam wet filter, place the
removed power head in an upside down
position, and carefully remove the foam
wet filter 19 . Fig. 16.
Fig. 16
26. Use a mild soap and water solution to
wash the foam wet filter
clean water. Fig. 17.
Fig. 17
19 and rinse with
27. Allow the wet filter to air dry for 24 hours
before installing onto the filter cage.
EMPTYING LIQUID WASTE FROM
THE TANK
28. After wet pick up operation, empty the
collection tank 8
drain cap. Drain liquids into a suitable
receptacle or drain. Fig. 18. Remember to
refit the drain cap to the collection tank.
Fig. 18
STORAGE
Before storing your vacuum, the collection
tank should be emptied and cleaned. The
accessories should be cleaned and stored so
they can be readily available when needed.
Store the wet/dry vacuum indoors. For
convenient storage, the accessories can be
inserted into the accessory storage slots
the vacuum.

REGISTER ONLINE

Thank you for your purchase. Register your
product now for:
• WARRANTY SERVICE: Registering your product
will help you obtain more efficient warranty
service in case there is a problem with your
product.
• CONFIRMATION OF OWNERSHIP: In case of an
insurance loss, such as fire, flood or theft,
your registration of ownership will serve as
your proof of purchase.
• FOR YOUR SAFETY: Registering your product
will allow us to contact you in the unlikely
event a safety notification is required under
the Federal Consumer Safety Act.
Register online at www.craftsman.com/
registration
ENGLISH
by unscrewing the
4
on
9