Advertisement
When applying a solvent type cleaning solution, use one dry clean cloth to apply the solution
and a second cloth to blot the stain.
If cleaning instructions call for the use of any water, use distilled water only. Tap water may
contain minerals that can cause a ring.
Blot the stain with the cleaning solution. Do not rub, brush or scrub. Excessive rubbing may
cause permanent stains, color distortion or permanent damage to the fabric. Always follow
the instructions on the cleaning solution bottle.
Work from the outer edge toward the center of the stain to avoid enlarging it.
Repeat process using a clean spot on the dry cloth to avoid re-depositing the stain. Continue
to apply cleaning solution sparingly and blot until stain no longer transfers onto the cloth.
When you have removed as much of the stain as possible, blot any remaining cleaning
solution or moisture from the fabric. If the spot is in a place where you can leave a clean, dry
cloth on the stain, do so and weigh down the cloth allowing it to remain on the spot while it
dries.
If you have any doubt about best cleaning or the stain persists contact an upholstery
professional for cleaning.
Retain these instructions for future reference.
Your feedback is very important to us and we would love to hear your comments on your new
furniture. Please visit our website to leave a review. Thank you.
John Lewis Partnership
171 Victoria Street London –
SW1E 5NN
www.johnlewis.com
P a g e 4 of 4
Advertisement
