Important Notes On Environmental Protection; Notes On Still Images - Grundig 32 VLE 4301 BA Manual

SEtup­AND­SAFEtY
Do not connect any other equipment while the
7
device is switched on. Also switch off other
equipment before connecting it.
Do not plug in the power cord of the device
7
until you have connected the external equip-
ment and the antenna.
Make sure the mains plug is freely accessible.
7
Caution:
If you plan on using a wall bracket for your
7
television, make sure you read the assembly
manual for the wall bracket or have a spe-
cialist assemble it.
When purchasing the wall bracket, make
7
sure that all the fastening points on the televi-
sion are also on the wall bracket and that
they are all used when mounting it.
Important­notes­on­
environmental­protection
The following information will help you to save
7
resources – and money as well.
If you are not using your television set for
7
s everal days, you should pull out the mains
plug for environmental and safety reasons.
This way the television does not consume any
electricity.
As switching off the television set does not
7
completely disconnect it from the mains, pull
out the plug to disconnect it from the mains
completely.
If the device is equipped with a power switch,
7
switching it off using this switch will be suffi-
cient. The energy consumed by the television
set is reduced to virtually 0 W.
In standby mode, the television set uses very
7
little energy. However, it may be necessary
to leave the television set in standby mode
for certain functions (for example automatic
switch-on and switch-off and for timer func-
tions).
The television set uses less energy when the
7
brightness is reduced.
­ 4
ENGLISH
­ - -----------------------------------------------------------------------------------------------------
Notes­on­still­images
Watching the same image for a long time on the
screen may cause a still image remains feebly on
the background. Feeble image(s) on the back-
ground is originated from LCD/LED technology
and does not require any action under guaran-
tee. To avoid such cases and/or minimize the
impact, you may observe the tips below.
Do not allow the same TV channel to stay on
7
the screen for a very long time. Channel logos
may cause this situation.
Do not allow the images, which are not full
7
screen, to constantly stay on the screen; if not
streamed in full screen format by the broad-
caster, you can convert the images to full
screen by changing picture formats.
Higher brightness and/or contrast values will
7
lead this impact to appear faster; therefore,
you are recommended to watch your TV in the
lowest brightness and contrast levels.