Table of Contents
Advertisement
uSBopErAtIoN
Fileformats
Your television can work with the following file
formats using the USB sockets:
Audiodata
Your television can play audio data in the for-
mats MP3, AAC, WMA.
MP3 is the abbreviation for MPEG-1 Level 3 and
is based on the MPEG-1 standard, which was
developed by the MPEG (Motion Picture Expert
Group).
AAC stands for Advanced Audio Coding and
was also developed by MPEG. AAC provides
better sound quality at an identical data rate.
WMA (Windows Media Audio) is a compres-
sion standard for audio data developed by
M icrosoft.
These formats allow audio files to be recorded
and played which sound as good as a CD, while
taking up only a fraction of the memory space.
File name extensions which are supported: MP3,
WMA, M4A, AAC.
MP3 files can be organised into folders and
s ubfolders, as on the computer.
Imagedata
Your television can display pictures in the formats
JPEG, PNG and BMP.
JPEG stands for Joint Picture Experts Group.
It denotes a process for compressing picture files.
PNG and BMP are process used to save image
data with no, or very little, losses.
Picture files can be stored with other types of files
on one medium.
These files can be organised into folders and
subfolders.
1 8
ENGLISH
---------------------------------------------------------------------------------------------------------------
Connectingexternal
datamedia
Before connecting the data medium, switch the
television to standby using
nect the d evice and then switch the television on
again.
Before removing the external data medium,
the television set must be switched to standby,
so that no data loss occurs.
Notes:
7
7
A bi-directional data transfer as defined for
7
U SB transfer is not in itself an operating
7
1 Connect the
and the corresponding socket on the data de-
vice (external hard drive, digital camera, card
reader or MP3 player) using a USB cable;
2 Confirm the display
(green).
– T he file browser appears.
If you use a network cable for external hard
disks which are connected to the
socket on the television, this network cable
must also be disconnected from the power
supply when the television is switched off.
External data media may not be disconnect-
ed from the television set while files on the
data medium are being accessed.
ITE (Information Technology Equipment)
d evices in EN 55022/EN 55024 is not
possible.
mode. It is only an additional function.
»
«
uSB
socket of the television
»
«
powEr
. Con-
»
«
uSB
»
«
»
«
with
●
Advertisement
Table of Contents
