Advertisement
• Once you have a desired antenna location,
plan how to route the cable from this
location to the receiver, avoiding blocked
passages and any obstructions that could
kink, crimp, twist, or chafe the cable. If the
cable will come into contact with a rough
metal opening, use a rubber grommet to
prevent damage.
• To ease routing of the cable, the antenna
connector may be removed by pushing
down on the tab marked "PUSH" and
pulling on the connector (do NOT pull on
the cables).
• Use pre-existing wiring channels created by
the vehicle manufacturer whenever feasible.
16
Hide quick links:
Advertisement
