Table of Contents
Advertisement
Wireless FM Modulator*
Many late model cars do not come with built-in cassette players. These
Roady users may purchase an optional wireless FM modulator that sends the
audio signal through the vehicle's existing FM antenna.
Roady Receiver Installation
Your Roady Receiver can be installed as follows:
1. First, attach all of the components as shown in figure 4 (page 15). Insert
cassette audio adaptor into the vehicle's cassette deck, the 12V power adaptor
into the cigarette lighter, and the antenna on the car's roof. Turn on the car
and Roady to verify that the system is working. You should always be able
to access Channel 1, even if your service is not activated. Disassemble the
system, and proceed with step 2.
2. Identify a hard, flat surface within your car to allow the optimum Roady
viewing position for the primary user as well as access to the cassette
player, power source, and antenna-cable route. In order to maximize
visibility, this position should be chosen to minimize glare or direct
sunlight on the display. Do not install the mount where it or Roady
could block your vision, vehicle airbags,
or controls. Do not install the mount on a
leather surface. The adhesive used on the
mount is not easily repositioned when
installed, so please use care when choosing
the location and placing the mount.
*Optional Delphi XM wireless FM modulator available fall 2003.
Warning: The Roady Receiver
should be placed in your vehicle where
it will not interfere with the function of
safety features, e.g., deployment of
airbags. Failure to correctly place the
Roady Receiver may result in injury to
you or others if the unit becomes
detached during an accident.
17
Hide quick links:
Advertisement
Table of Contents
