Delphi Roady SA10035 User Manual [Page 10]: Turning Roady On And Off

Delphi roady sa10035: user manual.

Table of contents Download Manual (32 pages, 0.3 Mb) Add to your account Write a comment Upload Manual

Basic Operations

Turning Roady On and Off

Press

automatically tune in to the last channel listened to and recall the previous

settings.

Basic Channel Selection

Select a channel by number

1. Verify that Roady is in Direct Entry mode. "Direct" should appear in the

upper right corner of the display. If A, B, or C appears, press

display says "Direct."

2. Enter channel number using the number keys, i.e., 5 + 0 for Channel 50.

Set/select channel presets

Your Roady Receiver can store up to 30 preset channels. They are organized

into three different groups (Preset A, Preset B, and Preset C), each with 10

channels corresponding to the 10 number keys. For preset 10, you only

need to press "0."

Selecting channel presets

preset/direct

Press

display. Press the number key corresponding to the desired preset.

Setting channel presets

1. Tune in the channel you want to register as a preset, making sure it is playing.

2. Select either Preset A, Preset B, or Preset C by pressing

B, or C appears in the upper right corner of the display.

on the Roady Receiver. When first turned on, the receiver will

until an A, B, or C appears in the upper right corner of the

preset/direct

until the

preset/direct

until an A,

Next page -> <- Previous page