Advertisement
What's in the box?
1 2
vehicle swivel
mount
vehicle power
adaptor
roadyXT
receiver
vehicle antenna
surface prepa-
ration kit
remote
vehicle vent
roadyXT
mount
home antenna
Home Kit
home cradle
sold separately
(SA10176)
vehicle cradle
home power
adaptor
audio cables
cassette adaptor
Additional Vehicle Kits sold separately
(SA10178)
Display
signal strength –
search by scanning
display
search channels
channel selection
1 to 3 bars
all channels
modes 1-5
by category
mode – direct
entry or preset
banks A, B, or C
additional info – channel
name, channel number,
artist, song title, Stock
Ticker, and Info Extras
Controls
power
menu – access
advanced features
up and down arrows,
and configuration
select – change chan-
options
nels, choose menu
options, TuneSelect
disp – change
search – look up channels
what you see on
by category or scan all
the display
channels
pre/dir – select
memory – save
jump – return to
numbers – enter a
between direct
and recall up to
previous channel;
channel directly or
channel entry or
20 artist names
press and hold to
select favorite presets
up to 30 presets
or song titles
select one of last
six FM frequencies
used for transmitter
Remote Control*
Remember to pull out the clear plastic
tab from the remote battery compart-
ment before using the remote.
To remove the battery from the remote,
use your thumb to press the center of
the battery tray and pull it out. Replace
the battery with the equivalent size and
voltage, taking care to insert it with the
positive (+) side up.
power
menu – access
advanced features and
configuration options
up and down arrows, select –
change channels, choose
+ and – change channels,
menu options, TuneSelect
or control volume if
roadyXT is placed in a
Delphi audio system
search – look up
channels by category
jump – return to previous
or scan all channels
channel; press and hold
to select one of last six
FM frequencies used for
modulator
pre/dir – select between
direct channel entry or
up to 30 presets
numbers – enter a
channel directly or
select favorite presets
disp – change what you
see on the display; show
artist name, song title,
memory – save and
channel number, stock
recall up to 20 artist
quotes, or Info Extras
names or song titles
*Sold separately
Using roadyXT in your vehicle
Because every vehicle is different, we can only provide some general
guidelines. If you need help, consult a professional installer.
• Decide which method (cassette adaptor, wired connection, or wireless
FM transmitter) is best for your vehicle and location.
• Always do a trial run before installing anything permanently. Temporarily
connect all power, audio, and antenna lines. Make sure that you receive
the XM signal and that you hear XM programming through your vehicle's
™
audio system.
Audio quality
Placing the antenna
For best reception, place the XM antenna on the vehicle's metallic roof, at least
6" from any window or sunroof. It can be placed in the front, middle, or rear
of the roof.
If the car is a hard- or soft-top convertible, you may mount the antenna on
the metal trunk lid. It should be at least 4" from the rear window. Ensure that
the antenna and cable don't interfere with the opening or closing of the
convertible top and the trunk lid.
Warning: Failure to properly install the antenna may result in injury to yourself or to
others if it becomes detached during an accident.
Use the CASSETTE ADAPTOR
if your vehicle's audio system
has a built-in cassette player.
For a neat, fully integrated instal-
lation, use the DELPHI FM DIRECT
ADAPTOR (model SA10112, sold
separately). The FM Direct
Adaptor must be connected to
your car radio and to the car's FM
antenna. We recommend that you
consult a professional installer.
The WIRELESS FM TRANSMIT-
TER is the easiest and quickest
way to hear XM programming
in your vehicle. Simply set your
FM radio and your roadyXT to
the same frequency.
TIP: If you route the antenna cable through the
trunk seal, use the lowest part of the weather
seal. This should minimize any water leaks.
TIP: If you use your roadyXT's wireless
FM transmitter, mount the XM antenna
as close to your vehicle's FM antenna
as possible. The FM antenna may be a
wire or metallic strip embedded in the
windshield or rear window.
TIP: Don't install the XM antenna inside your
vehicle or on a non-metallic surface. Doing so
will likely degrade the signal and you will probably
experience more signal interruptions.
Advertisement
