Responding To Error Messages - Dell 2100 User Manual

R
esponding to Error Messages
If an error message appears on your monitor screen while
the system is booting, make a note of the message. Then,
before entering the System Setup program, refer to the
chapter titled "Messages and Codes" in your Diagnostics
and Troubleshooting Guide for an explanation of the
message and suggestions for correcting any errors. (An
exception to this routine: It is normal to receive an error
message the first time you boot your system after install-
ing a memory upgrade. In that situation, you do not need
to refer to the Diagnostics and Troubleshooting Guide—
just follow the instructions in "Performing a Memory
Upgrade" in Chapter 7 of this guide.)
If you are given the option of pressing either <F1> to
continue or <F2> to run the System Setup program, press
the <F2> key.
Using the System Setup Program 4-57