Honda CTX700 2016 Owner's Manual page 82

Engine Oil Changing Engine Oil & Filter
u
Oil filter
7. Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8. Install the new oil filter and tighten.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m).
9. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 22 lbf·ft (30 N·m, 3.1 kgf·m).
80
10. Fill the crankcase with the recommended
Rubber seal
11. Check the oil level.
12. Check that there are no oil leaks.
oil ( P. 59, 144) and install the oil fill
2
cap/dipstick.
Required oil
CTX700/A
When changing oil & engine oil
filter:
3.6 US qt (3.4 liters)
When changing oil only:
3.3 US qt (3.1 liters)
CTX700D
When changing oil & engine oil
filter:
3.6 US qt (3.4 liters)
When changing oil only:
3.4 US qt (3.2 liters)
2
P. 77