Honda CTX700 2016 Owner's Manual page 114

Tire Puncture
u
4. Loosen the rear axle nut, lock nuts and
turn the adjusting nuts so the rear wheel
can be moved all the way forward for
maximum drive chain slack.
5. Remove the drive chain from the rear
wheel sprocket by pushing the rear wheel
forward.
6. Remove the rear axle nut, washer A and
washer B.
7. Remove the rear axle shaft, washer B, brake
caliper bracket, rear wheel and side collars.
u Support the brake caliper assembly so
that it doesn't hang from the brake
hose. Do not twist the brake hose.
u Avoid getting grease, oil, or dirt on the
disc to pad surfaces.
u Do not push the brake pedal while the
wheel is removed.
u CTX700D only
Do not pull the parking brake lever
while the wheel is removed.
112
Removing Wheels
Right side
collar
Lock nut
Rear axle shaft
Washer B
Drive
chain
Left side collar
Pulser ring
CTX700A/D only
Wheel speed sensor
CTX700A/D only
Washer A
Rear axle nut
Washer B
Adjusting nut
Lock nut
Adjusting nut