Air Travel; Emc Instructions - Dell Axim X5 System Information Manual

CAUTION: Safety Instructions (continued)

Air Travel

• Certain Federal Aviation Administration regulations and/or
airline-specific restrictions may apply to the operation of your
Dell device while you are on board an aircraft. For example, such
regulations/restrictions may prohibit the use of any personal
electronic device (PED) that has the capacity for intentional
transmission of radio frequency or other electromagnetic signals
while on an aircraft.
– In order to best comply with all such restrictions, if your Dell
portable device is equipped with Dell TrueMobile™ or some
other wireless communication device, please disable this
device before you board the aircraft and follow all
instructions provided by airline personnel with regard to
such device.
– Additionally, the use of any PED, such as a portable device,
may be prohibited in aircraft during certain critical phases of
flight, for example, takeoff and landing. Some airlines may
further define the critical flight phase as any time the aircraft
is below 3050 m (10,000 ft). Please follow the airline's
specific instructions as to when the use of a PED is allowed.

EMC Instructions

Use shielded signal cables to ensure that you maintain the appropriate
EMC classification for the intended environment. For parallel
printers, a cable is available from Dell. If you prefer, you can order a
cable from Dell at its worldwide website at www.dell.com.
• Static electricity can harm electronic components inside your
device. To prevent static damage, discharge static electricity from
your body before you touch any of your device's electronic
components, such as a memory module. You can do so by
touching an unpainted metal surface.
Sy ste m I nf or m ati on G uide
9