Husqvarna K 770 Operator's Manual page 32

1. Loosen the 3 screws on the air filter cover.
2. Remove the air filter cover.
3. Examine the air filter. Do step 6 and 7 if the filter is
not damaged.
4. Replace a damaged air filter.
a) Remove the air filter.
32
b) Install the new air filter.
5. Put back the air filter cover in its location.
6. Tighten the 3 screws.
To do a check of the water supply
system
1. Examine the nozzles on the blade guard and make
sure that they are not clogged.
2. Clean as necessary.
3. Examine the filter on the water connector. Make sure
that it is not clogged.
4. Clean as necessary.
1447 - 001 - 16.04.2020