2
On the sending device, touch and hold a file, select the files you want to share, touch
and select Bluetooth.
Operations may vary if you are sharing files from apps directly.
3
Touch the Bluetooth name of the recipient device to start sharing.
4
On the recipient device, accept the Bluetooth transfer request.
Unpair a Bluetooth Device
1
On the Bluetooth settings screen, enable the Bluetooth switch.
2
In the list of Paired devices, touch
then touch Unpair.
Mobile Data
Connect to Mobile Data
1
Make sure that mobile data is available on your SIM card. Wi-Fi only tablets do not
support mobile data.
2
Connect to mobile data using either of the following methods:
Swipe down from the status bar to open the notification panel, then swipe down
•
further to show all shortcut switches. Touch
Go to
Settings > Mobile network > Mobile data and enable Mobile data.
•
To conserve battery power and reduce data usage, disable the mobile data service when you
don't need it.
Personal Hotspot
Data services are not supported on Wi-Fi only tablets.
Once Personal hotspot has been enabled, you can share your mobile data or the Wi-Fi
network your tablet is currently connected to with other devices.
Share Your Network Connection via Personal Hotspot
1
Go to
Settings > Mobile network > Personal hotspot.
2
Set Device name and Password.
3
Enable Personal hotspot and your tablet will share your mobile data or the Wi-Fi
network you are currently connected to with other devices.
4
In the case of a Wi-Fi network, you can set the AP frequency band of the Wi-Fi hotspot.
Go to More > AP band and touch 2.4 GHz or 5 GHz.
5
In the case of mobile data, you can set a mobile data limit for a single session. Go to
More > Data limit and set the limit.
next to the name of the device you wish to unpair,
to enable Mobile data.
Settings
,
69