Programmed Play - Sharp CD-BK300W Operation Manual

Programmed Play

By specifying discs from 1 to 3, and tracks from 1 to 99, you can choose up to 32
selections for playback in the order you like.
1
Whilst in the stop mode, press
one of the 1 -
select the desired disc.
2
Press the PRESET
PRESET button to select
the desired track.
You can also select a track by pressing the
/ button on the remote control.
E-17 ENGLISH
Selected disc number
3 buttons to
or
Selected track number
PRESET /
3
Press the MEMORY/SET (MEM-
ORY) button to save the track
number.
When the track is memorised, "MEMORY" will appear.
4
Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be pro-
grammed.
If you make a mistake, the programmed tracks can be cleared by pressing the
CLEAR button.
5
Press the
To clear the programmed selections:
Press the CLEAR button on the remote control
whilst the "MEMORY" indicator is lit.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed. When all the tracks are cleared,
"MEMORY" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be dis-
played. Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the
last track of the original programme.
Notes:
z Opening the disc tray automatically cancels the programmed sequence.
z Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD to another, the programmed selections will not be cleared.
z During programme operation, random play is not possible.
or PRESET
Playback order
( ) button to start playback.