Dell Precision M4300 User Manual page 107

2 Turn the computer upside-down, and remove the two screws that secure the hard drive carrier to the
chassis.
1
NOTICE:
When the hard drive is not in the computer, store it in protective antistatic packaging. See "Protecting
Against Electrostatic Discharge" in the Product Information Guide.
3 Slide the hard drive carrier out of the computer.
4 Remove the new drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
NOTICE:
Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the
connector.
5 Slide the new hard drive into the bay and into the connector until it is fully seated.
6 Replace the screws.
7 Install the operating system for your computer (see "Restoring Your Operating System" on page 98).
8 Install the drivers and utilities for your computer (see "Reinstalling Drivers and Utilities" on page 96).
screws (2) 2 hard drive
Adding and Replacing Parts
1
2
105