Table of Contents
Advertisement
Program. (Programming) Menu
You can use the Program. (Programming) menu to delete a
channel, to change the programme number of a channel, to
give a channel name to a channel, and to start the A.P.S
(AUTOSTORE) function.
• Press “M” button to display the main menu.
• Press “ ” or “ ” button to select “PROGRAM.” item, then
“ ” or “ ” button to display the “PROGRAM.” menu.
To choose a channel in the PROGRAM. menu:
• Press “ ” / “ ”/ “ ” / “ ” button. The programme number
that you choose is high-lighted in the PROGRAM. menu
and you can view the picture of that channel.
Caution:
Using the DELETE or INSERT function it is possible to re-
write the current channel list in the PROGRAM menu. This
can cause other channels to be changed if they were former-
ly in locations affected by this function.
To give a channel name (NAME):
1. Choose the channel you want to give a channel name.
2. Press the RED button to enter the NAME mode.
3. Press “ ” or “ ” button to choose the position, and press
“ ” or “ ” button to choose each character of channel
name.
4. Press the RED button to store the channel name.
• To cancel the NAME mode, press the BLUE button.
To delete a channel (DELETE):
1. Choose the channel you want to delete.
2. Press the YELLOW button to enter the DELETE mode.
3. Press the YELLOW button to delete it.
• To cancel this DELETE mode, press the BLUE button.
To change the programme number of a channel
(INSERT):
1. Choose the channel you want to change the programme
number.
2. Press the GREEN button to enter the INSERT mode.
3. Press “
” / “
programme number.
4. Press the GREEN button to insert the channel to the cho-
sen programme number.
• To cancel this INSERT mode, press the BLUE button.
Downloaded from:
http://www.usersmanualguide.com/
ÃÃ8Ã
!
ÃÃÃÃÃ
!
ÃÃÃÃÃ
!ÃÃ8Ã!"
!
ÃÃÃÃÃ
!!ÃÃÃÃÃ
"ÃÃ8Ã#$
"
ÃÃÃÃÃ
!"ÃÃÃÃÃ
#ÃÃ8Ã#&
#
ÃÃÃÃÃ
!#ÃÃÃÃÃ
$ÃÃ8Ã$
$
ÃÃÃÃÃ
!$ÃÃÃÃÃ
%ÃÃ8Ã$$
%
ÃÃÃÃÃ
!%ÃÃÃÃÃ
&ÃÃÃÃÃ
&
ÃÃÃÃÃ
!&ÃÃÃÃÃ
'ÃÃ
ÃÃÃ
'
ÃÃÃÃÃ
!'ÃÃÃÃÃ
(ÃÃ
ÃÃÃ
(
ÃÃÃÃÃ
!(ÃÃÃÃÃ
ÃÃ
ÃÃÃ
!
ÃÃÃÃÃ
"ÃÃÃÃÃ
I6H @
DI T@SU
9@G@U@
6VUP TUPS@
”/ “ ” / “ ” button to choose new
To start A.P.S (AUTOSTORE)
A.P.S. automatically programmes the received channels in
your TV’s programme numbers.
1. Press the BLUE button to enter the AUTOSTORE mode.
A warning message appears.
6GGÃ QS@TUPS@9 Ã QSPBS 6HH@T
XDGGÃ 7@Ã @S6T@9
8PV IUS`
UVIDIBÃHP9 @
8PI UDIV@
UWÃ)ÃÃÃÃÃÃÃÃÃ86I8@ G
• To cancel the AUTOSTORE mode, press the “
ton.
2. Press “ ” or “ ” button to choose the “COUNTRY”, then
press “ ” or “ ” button the choose country you are now lo-
cated.
3. By pressing the up and down buttons, come to the Tuning
Mode item and select the mode at which your TV will run
the APS.
4. Press “ ” or “ ” button to choose the “CONTINUE”, then
press “ ” button to start A.P.S. The following message ap-
pears.
6QTÃ DTÃ SVIIDIB
UWÃ )ÃÃÃÃÃÃÃÃÃÃ 86I8@G
• To cancel the A.P.S., press the “
5. After A.P.S. is finalized, the PROGRAM. menu appears
again.
- 15 -
VF
8C6 II@G
QG@6T@Ã X6DU
” button.
” but-
Advertisement
Table of Contents
