Figure 1-12. Attaching The Strain-Relief Bracket - Dell PowerEdge 2650 Installation Manual

1-14 Rack Installation Guide
5. Install the strain-relief bracket to the back of the system (see Figure 1-12):
a. Thread the I/O cables you connected in step 4 through the slots of the strain-
relief bracket.
b. Insert the ends of the four long portions of the strain-relief bracket into the
four matching holes beside the hinge bracket.
c. Secure the captive thumbscrew to the back of the system.
bracket inserted
into four holes
strain-relief
bracket

Figure 1-12. Attaching the Strain-Relief Bracket

6. Connect the remaining cables to the system.
For details, see your system's Installation and Troubleshooting Guide or the
User's Guide.
Velcro strap
cables to
expansion
cards
captive
thumbscrew