Connecting Computer To Port Replicator; Attaching External Devices To The Port Replicator - Dell Inspiron 5000 User Manual

monitor connector
parallel port connector
serial port connector

keyboard connector
PS/2 mouse connector
AC adapter connector
support.dell.com
1. Refer to Figure 1-1 to attach external devices to the appropriate connectors on
the back of the port replicator.
NOTES: If the cable connector from the external device has thumbscrews, be
sure to tighten them to ensure a proper connection.
To connect the computer to a network, you must have a network card in your
computer. The advanced port replicator has a network card, so another card is
not required. However, the pass-through port replicator does not have a network
card so you must install a network card in your computer.
The port replicators do not provide small computer system interface (SCSI) sup-
port. To connect the computer to a SCSI device, you must attach a SCSI card to
your computer. See "PC Cards" in the system Help for information about using
PC Cards.
For detailed information on using external devices with your computer, see "Con-
necting External Devices" in the system Help .
2. Connect the external devices to an electrical outlet, if applicable.
1. Save all open files, and exit all open application programs.
2. Shut down the computer.
3. If you have not already done so, connect the AC adapter to the connector on the
port replicator (see Figure 1-1), and plug the AC power cable into an electrical outlet.
TV-out S-video connector
dual USB connector
SPDIF connector
line-in connector
microphone connector
Dell Inspiron 5000 Port Replicator User's Guide
NIC connector
(APR only)
line-out connector
1-3