Verification Steps - Jabra PRO 930 Application Notes

7. Configure Jabra USB Headsets
This section covers the steps to integrate Jabra PRO 930 USB Wireless headsets with one-X®
Communicator.
 Connecting the Stealth UC Wireless Headsets
7.1. Connect the Jabra USB Headset
Connect the Jabra PRO 930 USB Wireless Base station to a USB port on the one-X®
Communicator PC. Switch on the Jabra PRO 930 USB Wireless headset and a PC Connected
message is played through the earpiece.

8. Verification Steps

This section verifies that the Jabra solution has been successfully integrated with one-X®
Communicator.
1. Verify that the Jabra headset has been successfully installed and is ready for use with
one-X® Communicator.
2. Once the Jabra headset is selected in one-X® Communicator, verify that incoming and
outgoing calls can be established with two-way audio to the headset.
SJW; Reviewed:
SPOC 6/21/2016
Solution & Interoperability Test Lab Application Notes
©2016 Avaya Inc. All Rights Reserved.
10 of 12
PRO930_oneXC