Download Print this page

Dell OptiPlex GX1 Documentation Update page 4

Dell optiplex gx1: supplementary guide
Hide thumbs Also See for OptiPlex GX1:

Advertisement

1-2
Dell OptiPlex GX1 and NX1 Documentation Update
Diskette Maker, click the Start button and point to Programs. Then point to Dell
Accessories and click Program Diskette Maker. If your computer is part of a centrally
managed network, check with your network administrator for information on
reinstalling drivers and utilities.
If you are a network administrator and you received the Network Administrator's Kit,
Dell provides drivers and utilities for Windows 95 on diskettes. Normally, you should
install the drivers on the managing server and then use Intel
tion Manager to download and install the drivers on an OptiPlex GX1 Managed PC
system or an OptiPlex NX1 Net PC system. See your online Network Administrator's
Guide for information on downloading and installing drivers over the network.
To reinstall DirectX drivers locally on a system with a diskette drive, follow these
steps:
1.
If you have not done so already, create a program diskette set of drivers as
described previously. Or, if you received the Network Administrator's Kit, locate
the diskettes containing drivers and utilities.
2.
If you reinstalled Windows 95, make sure Universal Serial Bus (USB) support was
reinstalled along with the operating system.
USB support is enabled when Windows 95 is installed by Dell. However, if you
need to reinstall the operating system, USB support should also be reinstalled.
See your system's Reference and Installation Guide or your online Network
Administrator's Guide for more information.
3.
Save any work and close all application programs, because you will need to
restart the computer at the end of this procedure to complete the installation.
4.
Insert the DX5 Drivers Diskette 1 into the diskette drive.
5.
Click the Start button and then click Run.
6.
Type a:\setup.exe and click OK.
Follow the instructions on your screen, and insert the DX5 Drivers Diskette 2
7.
when prompted.
When the setup.exe program is complete, a message appears prompting you to
run another program.
8.
Click the Start button and then click Run. Type c:\windows\ dx5core.exe
and click OK.
9.
Follow the instructions on your screen to complete the DirectX drivers installation
and restart the system when prompted.
10. After the system restarts, insert the video drivers diskette into the diskette drive.
11. Click the Start button and then click Run.
12. Type a:\setup.exe and click OK.
®
®
LANDesk
Configura-

Advertisement

loading

This manual is also suitable for:

Optiplex nx1