Dell Precision Tower 3630 Installation Manual page 4

The dust filter for the Precision Tower 3630 helps protect the system from fine dust particles. After installation of the dust filter, the BIOS
can be enabled to generate a preboot reminder to clean or replace the dust filter based on the time interval set.
Follow these steps to install the dust filter:
1 Align the plastic tabs of the dust filter to the slots on the system chassis and gently press to ensure that the dust filter fits firmly onto
the system.
2 To remove the dust filter:
a With the help of a plastic scribe, gently pry the edge from the bottom to loosen the dust filter [1].
b Remove the dust filter from the system chassis [2].
4 Dust filter for Precision Tower 3630
Dust filter for Precision Tower 3630
1