If you encounter too much resistance when you insert the card, do not
3
force the card. Check the card's orientation, and try again.
Your computer recognizes most PC Cards and automatically loads the
4
appropriate device driver for use with the computer. If the
configuration program tells you to load the manufacturer's drivers,
install them with the CD that accompanied the PC Card.
Removing a PC Card
NOTICE: Use the PC Card configuration utility on the taskbar to select and
stop a card from functioning before you remove it from the computer. If you do
not remove the card in the configuration utility, you could lose data from open
programs.
NOTICE: Do not attempt to eject a card by pulling its dongle, if one is
attached.
ress the eject button, and gently remove the card.
P
HINT: Press the button
with the upper dot to eject
the top card and the
button with the lower dot
to eject the bottom card.
79
Adding Pa rts