LG 32LT570H Commercial Mode Setup Manual page 59

Reference: Downloading a Boot Logo Image using a USB Memory
This section describes how to download a boot logo image using the TV Manager "Download
Boot Logo" option, though you may also use the Ez Download utility to download the boot logo, if
desired. See "Ez Download Utility" on pages 21 to 24 for further information.
A boot logo image, also known as a "splash screen," is briefly displayed when the TV is turned
ON from its standby (OFF) state.
Boot Logo Image File Guidelines
• The boot logo image must be a baseline (not progressive) JPEG.
• The image should be no larger than 1 MB.
• The maximum resolution allowed for a 32LT570H boot logo is 1360 x 768 pixels (HD).
• The maximum resolution allowed for a 43/49LT570H boot logo is 1920 x 1080 pixels (FHD).
• Avoid using special characters, such as ?, &, @, etc., in the image filename.
Before You Begin
• The boot logo image file must be stored in a folder named "LG_DTV" in the root directory of the
USB memory device.
• Ensure the USB device has been formatted with FAT format.
Download the Boot Logo Image
1. Turn ON the TV, and then insert the USB memory device into the TV's USB port.
2. Press MENU SETTINGS on the Installer Remote to display the TV setup menus (TV is in
Pass-through Mode) or the Function Menu (TV is not in Pass-through Mode).
3. Use the arrow navigation keys to select/highlight either the General menu icon from the TV
setup menus or the Safety menu icon from the Function Menu. Then, press the number "7"
key a total of seven times to access the TV Manager.
Note: Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
TV MANAGER
USB
Diagnostics
Back
206-4340
Ez Download
Download Boot Logo
Update TV Software
Update PTC Software
Import Clone File
OK
Device
(Continued on next page)
59