Husqvarna 331RB Workshop Manual page 26

7. Remove the 3 screws (A) and the muffler cover (B).
C
B
A
A
8. Remove the 4 screws (C and D) and the cylinder
cover (E).
9. Remove the 4 screws (F) and the clutch drum
housing (G).
10. Remove the 5 screws and the flywheel cover.
26 - Repair instructions
E
D
F
G
11. Remove the screws, the washers, the cables and
the ignition module.
12. Remove the 2 screws and the 2 washers that hold
the centrifugal clutch. Remove the centrifugal clutch
and the 2 washers between the flywheel and the
centrifugal clutch.
13. Attach the flywheel puller, apart from the center unit,
on the flywheel.
1281 - 001 -