Scotts 60362S Owner's Manual page 13

LED LIGHTS
See figure 11-12
The LED lights (1) are located at the front of the motor
cover. The lights can only be illuminated when the
battery and switch key are installed in the mower and
when the bail wire is engaged.
1
To turn on, press the LED lights switch button (1). The
lights will illuminate when the bail wire (2) is pulled
toward the handle (3).
When the bail wire (2) is released, the lights will remain
lit for a few seconds before automatically going
out. When the bail wire (2) is engaged again, the lights
will illuminate.
To turn the LED lights off, press the LED switch button
(1) again.
POWER INDICATOR ON THE MOWER
See figure 12
The mower is equipped with a power indicator (4) to
indicate the charge capacity status of the battery pack
and the working status of the mower.
button, LED displays shows the battery capacity.
OPERATION
Fig. 11
3
4
2
1
Fig. 12
By pressing the
Model 60362S
LED lights
All LED are lit
LED 1, 2, 3 are lit
LED 1, 2 are lit
LED 1 is lit
WARNING: The operation of any mower can result in
foreign objects being thrown into the eyes, which can
cause severe eye damage. Always wear safety glasses
while operating the mower and while performing any
adjustments or repairs.
WARNING: Ensure that other people and pets remain
at least 100 feet (30 m) away when the mower is in use.
INSPECT THE CUTTING AREA
Remove all stones, sticks, wire, bones, and other
debris that might be thrown by the rotating blades.
SETTING BLADE HEIGHT
See figure 13
When shipped, the wheels on the mower are set to a
low-cutting position. Before using the mower for the first
time, adjust the cutting position to the height best suited
for your lawn. The average lawn should be between
1-1/2 in. to 2 in. during the cool months and between 2
in. to 3 1/4 in. during the hot months.
The mower can be set to 6 cutting heights between
1.5" (38mm) and 3.75" (95mm). Choose the proper
cutting height according to the types and conditions of
the grass.
To adjust the blade height:
•
To raise the blade height, grasp the height
adjustment lever (1) and move it toward the back of
the mower.
•
To lower the blade height, grasp the height
adjustment lever (1)
and move it toward the
front of the mower.
Fig. 13
13
Battery status
Full charged (75-100%)
Battery is 50%-75% charged
Battery is 25%-50% charged
Battery is empty (0%-25%).
Charge the battery.
1