Table of Contents
Advertisement
If the Extra Rinse is set as a
default option and you select
a compatible washing
programme, the display
shows
. In this case, by
pressing the Extra Rinse
button , it is possible to add
just one rinse.
7.7 Plus Steam
This option adds a steam phase followed
by a short anti-crease phase at the end
of the washing programme.
The steam phase reduces fabric
creasing and facilitates the fabric ironing.
The indicator
flashes on the display
during steam phase.
This option can increase the
programme duration.
When the programme stops the display
shows a zero
, the indicator
steady on and the indicator
flashing. The drum performs smooth
movements for about 30 minutes to keep
the steam benefit. By touching any
button the anti-crease movements stop
and the door unlocks.
A small laundry load helps to
reach better results.
7.8 Time Save
With this option you can decrease the
programme duration.
• If your laundry is normally or lightly
soiled, it may be advisable to shorten
the washing programme. Touch this
button once to decrease the duration.
• In case of smaller load, touch this
button twice to set an extra quick
programme.
The display shows the indicator
This option can also be used
to shorten the Steam
programme duration.
7.9 Skipping phase button
(Option)
By touching this button you can set:
• Only Rinse at first touch. The washing
programme starts from the rinsing
phase by skipping the wash phase.
• Spin only at second touch. The
appliance skips wash and rinse
phase.
• Drain only at third touch. The
appliance performs only the drain
phase.
7.10 Delay Start
is
With this option you can delay the start of
starts
a programme in a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching the Start/Pause button,
the display shows the indicator
the selected delay time and the
appliance begins the countdown.
7.11 Anti-Allergy
Set this option with white Cottons items
programme. When the option is selected,
neither the temperature or the cycle time
can be changed. Option Time Save
and Extra silent
The corresponding indicator above the
touch button illuminates.
.
This option removes micro-organisms
thanks to a washing phase with the
temperature maintained above 60°C for
several minutes. This helps in removing
germs, bacteria, micro-organism and
particles. The addition of vapour together
with an additional rinsing phase ensures
All set options (except
permanent extra rinse)
are deselected
automatically.
At firth touch the appliance
proposes the default setting
of the washing programme
again.
are not available.
ENGLISH
17
and
Advertisement
Table of Contents
