Advertisement
8
Attach the Seat Legs (B-9) to the
Seat Rails using 2-1/4" Clevis Pins (H-8).
Secure with Hair Pins (H-5).
H-8
Make sure that the cut-away part of
the Seat Legs face in so that they
B-9
B-9
9
H-19
Secure Seat and Back Legs
with Wood Screws (H-19).
(These screws are
self-tapping and do not need
pilot holes.)
will support the Seat Rails.
H-8
H-19
10
Using (3) Middle Slats (B-74-M)
push the Wood Dowels
into the edge holes on
(2) Seat Slat Caps (K-20-S).
Find the (2) Seat Slats (B-78-S)
and push them onto the
Wood Dowels on the Slat Caps.
(The side labeled "SEAT" faces down.)
11
Using (4) Middle Slats (B-74-M)
push the Wood Dowels
into the edge holes on
(2) Back Slat Caps (K-27-B).
Find the (2) Back Slats (B-78-B)
and push them onto the
Wood Dowels on the Slat Caps.
(The side labeled "BACK" faces down.)
12
Find the Seat Slat Support (B-24-S) and place it under
the Seat Deck. Attach it with (2) 1-3/4" Wood Screws
(H-19) from the top. Turn the Seat Deck over and put
in (3) Wood Screws from the bottom. These screws
are self-tapping and do not need pilot holes.
Find the Back Slat Support (B-31-B) and place it under
the Back Deck. Attach it with (2) 1-3/4" Wood Screws
(H-19) from the top. Turn the Back Deck over and put
in (4) Wood Screws from the bottom.
B-74-M
B-78-S
B-74-M
B-78-B
SEAT
DECK
BACK
DECK
K-20-S
K-27-B
H-19
Advertisement
