Advertisement
4
H-8
H-5
K-36-B
Attach the Back Rails (K-36-B) to
the outside of the Prop Assembly
using 2-1/4" Clevis Pins (H-8).
Let the Prop Assembly swing down
so that the Prop Connector can go
below the Back Rails.
5
Please double-check your work at
this time. Any error in this
assembly will cause serious
problems later.
Be sure that the Props
are on the inside of the
Back Rails.
6
Be sure that the Prop
Connector goes below
the Back Rails.
K-10-BR
H-8
7
Be sure that the
Prop Connector
is below the
Back Rails.
Attach the Left and Right
Back Legs (K-10-BL and K-10BR)
to the outside of the Back Rails
using 3-1/4" Cevis Pins (H-12).
Do not put on the
Hair Pins at this time.
H-12
Make sure that the cut-away part of
the Back Legs face in so that they
will support the Back Rails.
Place the Seat Rails (B-37-S)
onto the 3-1/4" Clevis Pins
and secure with
Hair Pins (H-5).
B-37-S
Now put the
Hair Pins on the
3-1/4" Clevis Pins.
H-12
K-10BL
B-37-S
Advertisement
