General Operation - Jensen CAR10 Installation & Owner's Manual

10.1”capacitive touch screen 2 din multimedia mechless receiver
Table of Contents

Advertisement

CAR10
PREPARATION

General Operation

Power On/Off
Momentarily press
to turn the unit on. Press and hold to turn the
unit off.
Volume
Rotate the volume knob to increase or decrease the volume level.
Mute
Momentarily press MUTE to silence the audio. Momentarily press MUTE
again to return to the previously selected volume.
Rotating the volume
knob while the volume is muted will also cancel the mute function.
Mode
Press MODE at the top left corner of the screen to display the main
menu.
Radio/USB/microSD/BT Phone/Android Auto/CarPlay/AV In/BT Audio/
Equalizer/Setting
Note: Modes of operation can also be accessed by selecting the
corresponding icon from the main menu.
Main Menu
Operation Mode Selection: Press the
icon at the top left corner of the
screen to display the OSD main menu. Press the
Radio/USB/microSD/
BT Phone/Android Auto/CarPlay/AV In/BT Audio/Equalizer/Setting
in
the Main meu pate to select the desired source.
Dimmer
Press the
icon to adjust the brightness.
A/V In
Connect external audio/video devices to the rear RCA Type A/V Input
USB
Insert a USB flash drive to play MP3/FLAC
MP4/Xvid files.
/
Reset
To resolve abnormal operation or if the unit is inoperable, Press the
RESET button located behind the front panel directly under USB port.
The unit will reset the main processor to the default setting,
Note: Use the tip of a pen to access the reset button. To restore the
factory default software settings.
9

Advertisement

Table of Contents
loading

Table of Contents