Honda CMX500/A 2018 Owner's Manual page 103

CMX500A only
When removing and installing the wheel, be
careful not to damage the wheel speed
sensor and pulser ring.
#
Front Wheel
Removal
Place your motorcycle on a firm, level
1.
surface.
Remove the front axle bolt.
2.
Wheel speed sensor
CMX500A only
Right side collar
Front axle bolt
3.
4.
5.
Pulser ring
CMX500A only
Right axle
pinch bolts
Tire Puncture
Loosen the right and left axle pinch bolts.
Support your motorcycle securely and
raise the front wheel off the ground using
a maintenance stand or a hoist.
Remove the front axle shaft, front wheel
and side collars.
Avoid getting grease, oil, or dirt on the
u
disc or pad surfaces.
Do not pull the brake lever while the
u
wheel is off the motorcycle.
Left side collar
Left axle pinch bolts
Removing Wheels
u
Front axle shaft
Continued
99