Choosing The Right Installation Location; Installing The Ceiling Bracket - Hunter Dempsey Installation Manual

1886
You probably bought this fan with a location in mind. Let's check below to make sure it is a good fit.
Check the room dimensions:
30 inches
from blade tip to
nearest wall or
obstruction
from bottom edge
You have two options for installation. Pick which one works best for your location. Remove any existing
bracket prior to installation. Only use the provided Hunter ceiling bracket that came in your fan's box.
Do this first!
OFF
Option 1:
Machine Screws
Use machine screws
(provided with outlet box)
and washers when securing
to existing ceiling fan-rated
outlet box. Make sure it is
securely installed and is
acceptable for fan support of
31.8 kg (70 lbs) or less.
Hunter Pro Tip:
The machine screws are the ones that
came with your outlet box.
Top Housing
Adapter
Thread the wires through the top housing.
Place the top housing onto the motor housing
so that the holes in the top housing lineup with
the holes in the motor housing and the adapter.
3
Ceiling Bracket

Choosing the Right Installation Location

7 feet
of blade to the
floor

Installing the Ceiling Bracket

Installing the Top Housing
Rest the trim ring on the top housing.
Hanging Fan Wiring
Check the outlet box:
Option 2:
Wood Screws
Use wood screws and
washers (included) when
securing to support structure
with approved electrical
outlet box. Drill 9/64" pilot
holes in support structure
to aid in securing ceiling
bracket with hardware found
in the
Trim Ring
Canopy Blades
You must be able to
secure the fan to building
structure or fan-rated
outlet box.
bag
hardware bag.
Wood Screw
Canopy
Adapter
Place the canopy on the top housing. Ensure
all four screw holes line up with the screw
holes in both the top housing and the adapter.
Light Bulbs
x2
Washer
x2
Remote