Jensen CMR3710 Installation & Owner's Manual page 9

Audio Settings
Equalizer
Balance / Fader
General Operation
From any screen, press the Audio button in the lower right corner.
Adjust the EQ screen to select EQ settings for the current source.
The unit had source tone memory, meaning that it will remember
the selected EQ settings for each source.
1
2
3
1. Adjust the volume level for the current source.
2. Displays the EQ Settings for the current source.
3. Turns the EQ function on or off.
4. Turns the Loudness function on or off.
5. Press to reset to the default EQ settings.
6. Press to return to the source screen.
7. Select a preset EQ setting, or select User for custom settings.
8. Press to display and adjust Balance / Fader screen.
Adjust the Balance / Fader screen to select Balance, Fader and
Subwoofer settings. These controls do not have source tone
memory.
1
2
1. Adjust the volume level of the unit.
2. Adjust the Fader and Balance settings to distribute audio as
desired front to back and left to right.
3. Press to reset Balance and Fader to default settings.
4. Turn the subwoofer on or off.
5. Press to return to the source screen.
6. Return to EQ control screens
4
3
4
CMR3710 OPERATION
6
5
5
8
7
6
8