Storage Interface
Support for RAID 0, RAID 1, RAID 5, and RAID 10
Intel
USB
Chipset:
-
-
-
Internal
1 x 24-pin ATX main power connector
1 x 4-pin ATX 12V power connector
Connectors
1 x 8-pin ATX 12V power connector
1 x CPU fan header
4 x system fan headers
2 x addressable LED strip headers
2 x RGB LED strip headers
1 x Q-Flash Plus button
6 x SATA 6Gb/s connectors
2 x M.2 Socket 3 connectors
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
1 x USB 3.2 Gen 1 header
1 x USB 2.0/1.1 header
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI
2.0 module only)
2 x Thunderbolt
1 x serial port header
1 x Clear CMOS jumper
Back Panel
1 x PS/2 keyboard/mouse port
2 x SMA antenna connectors (1T1R)j
Connectors
1 x HDMI port
1 x USB 3.2 Gen 2 Type-A port (red)
5 x USB 3.2 Gen 1 ports
2 x USB 2.0/1.1 ports
1 x RJ-45 port
3 x audio jacks
I/O Controller
iTE
Hardware
Voltage detection
Temperature detection
Monitor
Fan speed detection
Overheating warning
Fan fail warning
Fan speed control
j Only for the Z490 UD AC.
* R efer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA
connectors.
Optane
Memory Ready
®
™
1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
7 x USB 3.2 Gen 1 ports (5 ports on the back panel, 2 ports available through
the internal USB header)
4 x USB 2.0/1.1 ports (2 ports on the back panel, 2 ports available through
the internal USB header)
add-in card connectors
™
I/O Controller Chip
®
* Whether the fan speed control function is supported will depend on the cooler you
install.
- 7 -