Installing The Reversible Slicing/Shredding Disc Or Slicing Blade - KitchenAid 5KFP0719 Instructions Manual

USING THE FOOD PROCESSOR
INSTALLING THE REVERSIBLE SLICING/SHREDDING DISC OR
SLICING BLADE
To slice: Turn the disc so that the
raised slicing blade is facing up.
1
To shred: Turn the disc so that the
small, raised shredding blades are
facing up.
Hold the disc by its centre hub and
lower it onto the drive adapter,
aligning the marks on the centre
hub of the disc to the marks on the
2
adapter. The disc should be level with
the top of the bowl. If the disc falls to
the storage position, lift it out, turn it
90°, and lower it again.
14 | USING THE FOOD PROCESSOR
W11186024A_01_EN_v09.indd 14
Alignment
marks
Process
Storage
The disc can be placed in two different
positions: high at the top of the bowl
for processing, and low in the bowl for
storage.
NOTE: While the disc will operate in
storage position, it will not perform as
well. Make sure the disc is level with the
top of the bowl for best performance.
Install the work bowl cover, making
3
sure the lid latch is pushed down to
the locked position.
4/16/18 4:09 PM