TP-Link Archer C5 User Manual page 60

Chapter 10
Note:
Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static
IP address for router's WAN port and synchronize your
3. In the Client IP Address
leased to the devices by the PPTP VPN server.
4. Enter the Username
5. Click Save to make the settings effective.
Step 2. Configure PPTP VPN Connection on Your Remote Device
The remote device can use the Windows built-in PPTP software or a third-party PPTP
software to connect to PPTP Server. Here we use the
as an example.
1. Go to Start > Control Panel
2. Select Set up a new connection or
3. Select Connect to a workplace
System Time
filed, enter the range of IP addresses (up to 10) that can be
and Password to authenticate clients to the PPTP VPN server.
> Network and Internet
network.
and click Next.
with internet.
Windows built-in PPTP software
> Network and Sharing
VPN Server
Center.
56