TP-Link Archer C58 Quick Installation Manual

Quick Installation Guide

AC1350 Wireless Dual Band Router
C58
Connect the Hardware
If your internet connection is through an Ethernet cable directly from the
wall instead of through a DSL / Cable / Satellite modem, connect the
Ethernet cable to the router's Internet port, and then follow Step 4 and 5
to complete the hardware connection.
Internet
Power adapter
Modem
Router
1
Turn off the modem, and
remove the backup battery
if it has one.
2
Connect the modem to the
router's Internet port with an
Ethernet cable.
3
Turn on the modem, and
then wait about 2 minutes
for it to restart.
Power adapter
4
Connect the power adapter
to the router and turn on
the router.
5
Verify that the following LEDs are on
and solid to confirm the hardware is
connected correctly.
Power 2.4G 5G Internet
On On On On (Blue or Orange)
Note: If the 2.4G LED and 5G LED are off,
press and hold the Wi-Fi button on the rear
panel for about 2 seconds. Within a few
seconds, both the LEDs should turn solid on.